Menu
Your Cart

SENSOR ,E4PA-LS400-M1-N

SENSOR ,E4PA-LS400-M1-N
SENSOR ,E4PA-LS400-M1-N
  • MODEL: E4PA-LS400-M1-N
  • LEAD TIME: 2 months
$1,489.00

Product data sheet

ItemE4PA-LS50-M1-NE4PA-LS200-M1-NE4PA-LS400-M1-NE4PA-LS600-M1-N
Sensing range50 to 500 mm120 to 2,000 mm240 to 4,000 mm400 to 6,000 mm
Dead band distance0 to 50 mm0 to 120 mm0 to 240 mm0 to 400 mm
Standard sensing object100 × 100 mm flat plate
Applied frequencyApprox. 380 kHzApprox. 180 kHzApprox. 85 kHzApprox. 65 kHz
Response time63 ms max.195 ms max.440 ms max.850 ms max.
Power supply voltage10 to 30 VDC; ripple (p-p): 10% max.
Power consumption1,800 mW max.
Analog outputCurrent output: 4 to 20 mA (Allowable load resistance: 500 Ω max.)
Voltage output: 0 to 10 V (1,000 Ω min.)
Protective circuitLoad short-circuit protection, mutual interference prevention
Mutual interference
prevention cycle time
10 ms34 ms77 ms143 ms
Linearity±1% FS max.
Repeat accuracy *0.1% FS max.
Temperature influence±1% FS of output value at +23°C in the temperature range of -10 to 55°C
Voltage influence±5% FS max. within rated power supply voltage range
Ambient temperatureOperating: -10 to 55°C (with no icing or condensation)
Storage: -40 to 85°C (with no icing or condensation)
Ambient humidityOperating and storage: 35% to 85% (with no condensation)
Insulation resistance50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength1,000 VAC (50/60 Hz) for 1 min between current-carrying parts and case
Vibration resistanceDestruction: 10 to 55 Hz, 1-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistanceDestruction: 300 m/s2 three times each in X, Y, and Z directions
Connection method5-conductor connector
Degree of protectionIEC60529: IP65
Weight (packed)Approx. 240 gApprox. 320 gApprox. 400 g
MaterialsCase: Stainless steel (SUS303)
Sensing surface: PBT resin, polyurethane, glass epoxy resin
Clamping nut: Stainless steel (SUS303)
AccessoriesOperation Manual