Product Characteristics
Total number of inputs and outputs
Number of digital outputs: 2; Number of analog outputs: 1
Measuring range
5.... .3000 ml/min
0.005... .3 l/min .3 l/min
System connections
Threaded connection G 1/4 DN6 flat seal
Applications
Special properties
Gold-plated contacts
Applications
Adder function; for industrial applications
Mounting
Pipe connection via adapter
Medium
conductive liquids; water; water as basic medium
Description of the medium
Conductivity: ≥ 20 µS/cm
Viscosity: < 70 mm²/s (40 °C)
Temperature of the medium [°C]
0.... .60
Compressive strength [bar]
10
Compressive strength [MPa]
1
Maximum permissible working pressure (for applications complying with CRN standards) [bar]
7.3
Electrical data
Operating voltage [V]
18.... .30 DC; (according to SELV/PELV)
Current loss [mA]
< 80
Protection class
III
Inverted phase protection
yes
Power-on delay time [s]
5
Total inputs/outputs
Total number of inputs and outputs
Number of digital outputs: 2; Number of analog outputs: 1
Inputs
Inputs
Counter reset
Outputs
Number of outputs
2
Output signals
Switch signal; Analog signal; Pulse signal; IO-Link; (Configurable)
Electrical design
PNP/NPN
Number of digital outputs
2
Output Function
Normally open/closed; (parameterizable)
Switching output DC voltage drop maximum value [V]
2
Continuous current load of switching output DC [mA]
200
Number of analog outputs
1
Analog current output [mA]
4.... .20; (adjustable range)
Maximum load value [Ω]
500
Analog voltage output [V]
0.... .10; (adjustable range)
Minimum load resistance [Ω]
2000
Pulse output
Flow meter
Short-circuit protection
yes
Short-circuit protection type
Pulse
Overload protection
Yes
Measuring/setting range
Measuring range
5.... .3000 ml/min
0.005.... .3 l/min
Display range [ml/min]
-1999.... .3600
Resolution [ml/min]
1
Switching point, SP [ml/min]
20.... .3000
Recovery point, rP [ml/min]
5.... .2984
Starting point of the measured value, ASP [ml/min]
0.... .2400
Measured value end point, AEP [ml/min]
600.... .3000
Lesser flow cut-off, LFC [ml/min]
< 60
Flow monitoring
Pulse value
1.... .3000 ml
Pulse length [s]
0,008.... .2
Temperature monitoring
Measuring range [°C]
-20.... .80
Resolution [°C]
0.2
Switching point, SP [°C]
-19.2.... .80
Recovery point, rP [°C]
-19.6.... .79.6
Measured value starting point [°C]
-20.... .60
Measured value end point [°C]
0.... .80
Setting step [°C]
0.2
Accuracy / Deviation
Flow monitoring
Accuracy (in the measuring range)
± (2 % MW + 0,5 % MEW)
Repeatability
± 0,2 % MEW
Temperature monitoring
Accuracy [K]
± 2,5 (Q > 0,5 l/min)
Reaction time
Flow rate monitoring
Reaction time [s]
0.15; (dAP = 0, T19)
Programmable delay time dS, dr [s]
0.... .50
Damping process value dAP [s]
0.... .5
Temperature monitoring
Response time T05 / T09 [s]
T09 = 40 (Q > 1 l/min)
Software / Programming
Parameterization
Flow monitoring; Quantity meter; Preset capacity meter; Temperature monitoring; Hysteresis/window; Normally open/closed; Output polarity; Current/voltage/pulse output; Start-up delay; Display can be switched off; Display units
Interfaces
Communication interfaces
IO-Link
Transmission type
COM2 (38,4 kBaud)
IO-Link revision
1.1
SDCI standards
IEC 61131-9
Shape
Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis
SIO Mode
Yes
Required mater port type
A
Analog process data
3
2-digit output process data
2
Process cycle min.
4
Supported DeviceID
Operation mode
DeviceID
default
671
Operating conditions
Ambient temperature [°C]
-10.... .60
Storage temperature [°C]
-25.... .80
Enclosure protection class
IP 67
Certificates/Tests
EMC Electromagnetic Compatibility
DIN EN 60947-5-9
CPA certified
Model
007MI
Accuracy class
-Tolerances
Maximum permissible error
± 2,5 % FS
Q (min)
0,0003 m³/h
Q (t)
-Q (t)
Q (max)
0,18 m³/h
Shock resistance
DIN IEC 68-2-27
20 g (11 ms)
Vibration
DIN IEC 68-2-6
5 g (10.... .2000 Hz)
MTTF [years]
144
Pressurized Equipment Directive
Good engineering practice; can be used for Group 2 fluids; on demand fluids Group 1 fluids
Mechanical Technical Data
Weight [g]
536.5
Material
Stainless steel (1.4404 / 316L); PBT-GF20; PC; FKM; TPE
Material (liquid-containing parts)
Stainless steel (1.4404 / 316L); PEEK; FKM
System connections
Threaded connection G 1/4 DN6 Flat seal
Display/operating parts
Display
Display units
6 x LED, green (ml/min, l/h, l, m³, °C, 10³)
Switching status
2 x LED, yellow
Measured values
Alphanumeric display, 4 digits
Programming
Alphanumeric display, 4 digits
Comments
Comments
MW = Measured value
MEW = Final value of the measuring range
Packaging unit
1 piece
Electrical connection
Connector: 1 x M12; Translator: A; Contacts: gold-plated
-800x800w.png "Electromagnetic flowmeter SM4000")
