Menu
Your Cart

Servo motor，BMH0702P06F2A

Servo motor，BMH0702P06F2A
Servo motor，BMH0702P06F2A
  • MODEL: BMH0702P06F2A
  • Weight: 3.50kg
  • LEAD TIME: 4-6 weeks
$590.60
Add to Cart
Buy Now Ask Question
Add to Wish List Compare this Product

Product data sheet

Main
Device short nameBMH
Product or Component TypeServo motor
Maximum mechanical speed8000 rpm
Continuous stall torque22.1 lbf.in (2.5 N.m) LXM32.D12N4 3 A, 400 V, three phase
22.1 lbf.in (2.5 N.m) LXM32.D12N4 3 A, 480 V, three phase
Peak stall torque65.5 lbf.in (7.4 N.m) LXM32.D12N4 3 A, 400 V, three phase
65.5 lbf.in (7.4 N.m) LXM32.D12N4 3 A, 480 V, three phase
Nominal output power700 W LXM32.D12N4 3 A, 400 V, three phase
700 W LXM32.D12N4 3 A, 480 V, three phase
Nominal torque19.5 lbf.in (2.2 N.m) LXM32.D12N4 3 A, 400 V, three phase
19.5 lbf.in (2.2 N.m) LXM32.D12N4 3 A, 480 V, three phase
Nominal speed3000 rpm LXM32.D12N4 3 A, 400 V, three phase
3000 rpm LXM32.D12N4 3 A, 480 V, three phase
Product compatibilityLXM32.D12N4 400...480 V three phase
Shaft endSmooth shaft
IP Degree of ProtectionIP54 standard
Speed feedback resolution32768 points/turn
Holding brakeWith
Mounting SupportInternational standard flange
Electrical ConnectionRotatable right-angled connectors

Complementary
Range CompatibilityLexium 32
[Us] rated supply voltage480 V
PhaseThree phase
Continuous stall current2.94 A
Continuous power1.51 W
Maximum current Irms9.7 A LXM32.D12N4
Maximum permanent current9.68 A
Second shaftWithout second shaft end
Shaft diameter0.4 in (11 mm)
Shaft length0.9 in (23 mm)
Feedback typeSingle turn SinCos Hiperface
Holding torque26.6 lbf.in (3 N.m) holding brake
Motor flange size2.8 in (70 mm)
Number of motor stacks2
Torque constant0.84 N.m/A 248 °F (120 °C)
Back emf constant54.08 V/krpm 248 °F (120 °C)
Number of motor poles10
Rotor inertia1.24 kg.cm²
Stator resistance3.8 Ohm 68 °F (20 °C)
Stator inductance12.2 mH 68 °F (20 °C)
Stator electrical time constant3.2 ms 68 °F (20 °C)
Maximum radial force Fr710 N 1000 rpm
560 N 2000 rpm
490 N 3000 rpm
450 N 4000 rpm
410 N 5000 rpm
390 N 6000 rpm
Maximum axial force Fa0.2 x Fr
Brake pull-in power7 W
Type of coolingNatural convection
Length7.6 in (193 mm)
Centring collar diameter2.4 in (60 mm)
Centring collar depth0.10 in (2.5 mm)
Number of mounting holes4
Mounting holes diameter0.2 in (5.5 mm)
Circle diameter of the mounting holes3.2 in (82 mm)
Net Weight7.3 lb(US) (3.3 kg)
Tags: HENJ-DMG24062704