0 to 55°C (32 to 131°F) when operating and -25 to 75°C (-13 to 167°F) when stored |
5 to 95%RH (no condensation) when operating |
Half amplitude: 0.035mm Sweep Count for X, Y, Z: 10 times (80 min in each direction)
The criterion is shown in IEC61131-2. |
Acceleration: 4.9 m/s2 Sweep Count for X, Y, Z: 10 times (80 min in each direction)
The criterion is shown in IEC61131-2. |
Half amplitude: 0.075 mm Sweep Count for X, Y, Z: 10 times (80 min in each direction)
The criterion is shown in IEC61131-2. |
Acceleration: 9.8 m/s2 Sweep Count for X, Y, Z: 10 times (80 min in each direction)
The criterion is shown in IEC61131-2. |
147 m/s2 Acceleration, Action time: 11 ms, 3 times by half-sine pulse in each direction X, Y, and Z
The criterion is shown in IEC61131-2. |
By noise simulator at noise voltage of 1,000 Vp-p, noise width of 1 μs, rise time of 1 ns and period of 30 to 100 Hz |
Perform dielectric withstand voltage test at the following voltage between each terminals and the main unit ground terminal.
Between power supply terminal (DC power supply) and ground terminal: 500 V AC for 1 min
Between output terminal (transistor) and ground terminal: 500 V AC for 1 min |
Perform insulation resistance test at the following voltage between each terminals and the main unit ground terminal.
Between power supply terminal (DC power supply) and ground terminal: 5 MΩ or higher by 500 V DC insulation resistance tester
Between output terminal (transistor) and ground terminal: 5 MΩ or higher by 500 V DC insulation resistance tester |
Class D grounding (grounding resistance: 100 Ω or less)
(Common grounding with a heavy electrical system is not allowed)
Ground the PLC independently or jointly. |
Free from corrosive or flammable gas and excessive conductive dusts |
2000 m or less
Do not use the PLC under pressure higher than the atmospheric pressure. Doing so may damage the PLC. |
