CONTACTOR LC1-D40AM7

Areas of application for contactors Used in non-inductive or slightly inductive loads, resistance furnaces

For AC loads with a power factor greater than or equal to 0.95.

Category of use AC-4

AC-1

AC-3

AC-3e

Number of poles 3P

Rated operating voltage [Ue] Power circuit: <= 690 V AC 25...400 Hz. .400 Hz

Power circuit: <= 300 V DC

Rated operating current [Ie] 60 A (at operating temperature <= 60 °C) at operating voltage <= <= 440 V AC AC-1 for power circuits

40 A (at operating temperatures <= 60 °C) at operating voltages <= <= 440 V AC AC-3 for power supply circuits

40 A (at operating temperature <= 60 °C) when operating voltage <= <= 440 V AC AC-3e for power supply circuits

[Uc] control circuit voltage 220 V AC 50/60 Hz

Additional information

Motor power (kW) 18.5 kW When operating voltage <= 380.... .400 V AC 50/60 Hz (AC-3)

11 kW when operating voltage <= 220... .230 V AC 50/60 Hz (AC-3) .230 V AC 50/60 Hz (AC-3)

22 kW when operating voltage <=415....440 V AC 50/60 Hz (AC-3) .440 V AC 50/60 Hz (AC-3)

22 kW at operating voltages <= 500 V AC 50/60 Hz (AC-3)

30 kW at operating voltages <= 660... .690 V AC 50/60 Hz (AC-3) .690 V AC 50/60 Hz (AC-3)

9 kW at operating voltages <= 400 V AC 50/60 Hz (AC-4)

18.5 kW at operating voltages <= 380... .400 V AC 50/60 Hz (AC-4) .400 V AC 50/60 Hz (AC-3e)

11 kW when operating voltage <=220... .230 V AC 50/60 Hz (AC-3e) .230 V AC 50/60 Hz (AC-3e)

22 kW at operating voltages <= 415... .440 V AC 50/60 Hz (AC-3e) .440 V AC 50/60 Hz (AC-3e)

22 kW at operating voltages <= 500 V AC 50/60 Hz (AC-3e)

30 kW at operating voltages <= 660... .690 V AC 50/60 Hz (AC-3e) .690 V AC 50/60 Hz (AC-3e)

Motor power 5 hp at operating voltage <= 230/240 V AC 50/60 Hz for 1-phase motors

10 hp at operating voltage <= 230/240 V AC 50/60 Hz for 3-phase motors

30 hp when operating voltage <= 575/600 V AC 50/60 Hz for 3-phase motors

10 hp when operating voltage <= 200/208 V AC 50/60 Hz for 3-phase motors

3 hp when operating voltage <= 115 V AC 50/60 Hz for 1-phase motors

30 hp at operating voltage <= 460/480 V AC 50/60 Hz for 3-phase motors

Model LC1D

Circuit contact type 3 NO

Protective cover with

Conventional heating current [Ith] 10 A (at operating temperature <= 60 °C) for signaling circuits

60 A (at operating temperature <=60 °C) for power supply circuits

Rated turn-on capacity [Irms] 140 A AC for signal circuits according to IEC 60947-5-1

250 A DC for signal circuits according to IEC 60947-5-1

800 A at operating voltages <= 440 V for power circuits in accordance with IEC 60947

Rated breaking capacity 800 A at operating voltage <= 440 V for power circuits in accordance with IEC 60947

Rated short-time withstand current [Icw] 320 A at operating temperature <= 40 °C for 10 s for power circuits

720 A at operating temperatures <= 40 °C for 1 s for power circuits

72 A at operating temperatures <= 40 °C for 10 minutes for power circuits

165 A at operating temperatures <= 40 °C for 1 min. for power circuits

100 A for 1 s for signal circuits

120 A for 500 ms for signaling circuits

140 A for 100 ms for signal circuits

Fuses for use with relays 10 A gG for signal circuits according to IEC 60947-5-1

80 A gG at operating voltages <=<= 690 V in conjunction with type 1, for power circuits

80 A gG at operating voltages <=<= 690 V with type 2, for power circuits

Average impedance 1.5 mΩ - Ith 60 A 50 Hz for power circuits

Power consumption per pole 2.4 W AC-3

5.4 W AC-1

2.4 W AC-3e

Rated insulation voltage [Ui] Power supply circuit: 600 V CSA approved

Power circuit: 600 V UL recognized

Signal circuit: 690 V in accordance with IEC 60947-1

Signal circuit: 600 V CSA approved

Signal circuits: 600 V UL recognized

Power circuits: 690 V according to IEC 60947-4-1

Overvoltage category III

Pollution class 3

Rated impulse withstand voltage [Uimp] 6 kV according to IEC 60947

Safety and reliability class B10d = 1369863 cycles Contactor with nominal load in accordance with EN/ISO 13849-1

B10d = 20000000 cycles Contactors for mechanical loads in accordance with EN/ISO 13849-1

Mechanical life 6 Mcycles

Electrical life 1.4 Mcycles 60 A AC-1 Ue <= 440 V

1.5 Mcycles 40 A AC-3 Ue <= 440 V

1.5 Mcycles 40 A AC-3e Ue <= 440 V

Control loop characteristics AC at 50/60 Hz Standard

Surge suppression module No built-in surge suppression module

Control voltage limits 0.3.... .0.6 Uc (-40...70 °C) Coil release AC 50/60 Hz

0.8... .1.1 Uc (-40...70 °C) .1.1 Uc (-40...60 °C) Coil release AC 50 Hz

0.85... .1.1 Uc (-40...60 °C) .1.1 Uc (-40...60 °C Coil suction AC 60 Hz)

1... .1.1 Uc (-40...60 °C) .1.1 Uc (60...70 °C Coil suction AC 50/60 Hz)

(Power consumption (VA) 140 VA 60 Hz cos phi 0.75 (at 20°C)

160 VA 50 Hz cos phi 0.75 (at 20 °C)

(~50 Hz Hold) Power Consumption (VA) 13 VA 60 Hz cos phi 0.3 (at 20 °C)

15 VA 50 Hz cos phi 0.3 (at 20 °C)

Thermal dissipation 4...5 W at 50/60 Hz

Operating time 4... .19 ms .19 ms breaking

12... .26 ms Closing 12...26 ms closing

Max. operating frequency 3600 operations/h at 60 °C

Wiring capacity Control circuits: screwed 2 1...2.5 mm² Cable type: flexible cord with terminal block