trip
1 mm ... 500 mm
Piston diameter
100 mm
buffer
Elastic buffer rings/pads at both ends
Self adjusting throttle terminal position buffer
Installation location
Optional
Compliant with standards
ISO 21287
Structural characteristics
Cylinder diameter
piston rod
Cylinder profile
position detection
By proximity switch
Derived type
Explosion protection certification (ATEX)
Do not use metals primarily composed of copper, zinc, or nickel. Exceptions: Nickel in steel, surface of chemically plated nickel, printed circuit boards, cables, electrical plug connectors, and coils.
Improve operational performance
Extended external thread of piston rod
Customized threads on the piston rod
Extended piston rod
Anti torsion
High corrosion resistance level
dustproof
Reinforced piston rod
Constant slow motion
Low friction
Double end piston rod
Hollow piston rod at both ends
High temperature resistant sealing element, up to 120 ° C
Laser etched nameplate
One end piston rod
working pressure
0.06 Mpa ... 1 Mpa
working pressure
0.6 bar ... 10 bar
Working mode
Double action
CE certification (see declaration of conformity)
Compliant with the EU Explosion Protection Directive (ATEX)
CE marking (see declaration of conformity)
According to the UK EX directive
explosion-proof
Zone 1 (ATEX)
Zone 2 (ATEX)
Zone 21 (ATEX)
Zone 22 (ATEX)
ATEX gas category
II 2G
ATEX Dust Category
II 2D
Gas explosion-proof and flame-retardant type
Ex h IIC T4 Gb
Dust proof, explosion-proof, and flame-retardant types
Ex h IIIC T120°C Db
Explosion proof ambient temperature
-20°C <= Ta <= +60°C
Working medium
Compressed air, in accordance with ISO 8573-1:2010 [7:4:4]
Description of Work and Pilot Media
Can work with lubricating medium (must continue to work with lubricating medium thereafter)
Corrosion resistance grade CRC
0- No corrosion resistance
2- Moderate corrosion resistance
3- High corrosion resistance
Paint Wetting Defect Substance (PWIS) Compliance
VDMA24364-B1/B2-L
VDMA24364 Zone III
Suitable for lithium-ion battery production
Do not use metals with copper, zinc, or nickel content exceeding 1%. Exceptions: Nickel in steel, chemically plated nickel surfaces, printed circuit boards, cables, electrical plug connectors, and coils
ambient temperature
-40 °C ... 120 °C
Theoretical force value at 6 bar, return stroke
4524 N
Theoretical force value at 6 bar, forward travel
4524 N ... 4712 N
Additional weight for each piston rod extended by 10 mm
25 g
Additional weight for each piston rod thread extension of 10 mm
16 g
Installation method
or
With through-hole
Installation through internal threads
With attachments
Pneumatic interface
G1/8
Material Description
RoHS compliance
Ring screw material
steel
Lid material
Coated die cast aluminum
Anodized refined aluminum alloy
Material of piston rod
High alloy steel
Cylinder material
Smooth anodized refined aluminum alloy
